EveryModel

Fisher & Paykel DE4560M1

4.5 kg vented dryer. 2 stars, 200 kWh a year on the label's one load a week (about $64 at 32¢/kWh), 600 mm wide by 495 mm deep.

If you buy through a link on this page, the retailer may pay us a commission.

Prices, key specs and fit

Prices

No price for this model at the retailers checked (28 Oct 2026): The Good Guys, Appliances Online and Bing Lee. It may be sold elsewhere, or through the brand's site.

Similar models with a price

Westinghouse WDV457H3WB 4.5 kg$399Check price
Westinghouse WDV556N3WB 5.5 kg$499Check price

Same dryer type and a similar capacity, priced at the retailers checked.

Key specs

Type
Vented
Capacity
4.5 kg
Width
600 mm
Depth
495 mm
Height
830 mm
Wall mountable
Yes, manufacturer-stated
Labelled cycle
2 h 20 m
Reverse tumble
Yes
Door hinge
Left
Energy stars
2
Energy a year
200 kWh
Cost a year, one load a week
$64
Manufacturer's warranty
2 Years
Made in
China
Registration no.
ACD0645

Size, weight, noise, series, door and warranty figures, where the registry is silent, come from retailer listings, checked 28 Oct 2026.

Dimensions are cabinet figures. Manufacturers offer wall-mount brackets for some vented models; heat-pump and condenser dryers sit on the floor.

Will it fit

The cabinet measures 600 mm wide, 495 mm deep and 830 mm high, from the register and retailer spec sheets. Enter the space it has to go in.

Not included. These are cabinet figures. Manufacturers state a ventilation clearance per model in the installation instructions; a figure typed into the Clearance box applies to both sides, the back and the top. No clearance figure for this model is held here, so the answer above allows none until one is entered.

Manuals and guides

Fisher & Paykel's manuals are on its support site.

How it compares

  • 200 kWh a year against a median of 220 across the 10 other vented dryers within a kilo of its size; one of them uses less.

Compare it

Figures trace to this machine's entry (ACD0645) in the Australian Government's energy-rating database. The label's annual energy figure assumes one load a week, so a household drying four loads a week uses four times it; the heat pump payback page works through that arithmetic.