10 kg heat pump dryer, priced from $1,199 at the retailers tracked (checked 28 Oct 2026). 10 stars, 122 kWh a year on the label's one load a week (about $39 at 32¢/kWh), 595 mm wide by 685 mm deep.
If you buy through a link on this page, the retailer may pay us a commission.
Prices checked 28 Oct 2026. Retailers may change prices during the day.
Key specs
Type
Heat pump
Capacity
10 kg
Width
595 mm
Depth
685 mm
Height
850 mm
Labelled cycle
6 h 11 m
Energy stars
10
Energy a year
122 kWh
Cost a year, one load a week
$39
Made in
China
Registration no.
ACD0895
Dimensions are cabinet figures. Manufacturers offer wall-mount brackets for some vented models; heat-pump and condenser dryers sit on the floor.
Will it fit
The cabinet measures 595 mm wide, 685 mm deep and 850 mm high in the Australian Government's energy-rating database. Enter the space it has to go in.
Not included. These are cabinet figures. Manufacturers state a ventilation clearance per model in the installation instructions; a figure typed into the Clearance box applies to both sides, the back and the top. No clearance figure for this model is held here, so the answer above allows none until one is entered.
Figures trace to this machine's entry (ACD0895) in the Australian Government's energy-rating database, and to retailer checks on the dates shown. The label's annual energy figure assumes one load a week, so a household drying four loads a week uses four times it; the heat pump payback page works through that arithmetic.
