10 kg heat pump dryer, priced from $2,999 at the retailers tracked (checked 28 Oct 2026). 10 stars, 122 kWh a year on the label's one load a week (about $39 at 32¢/kWh), 602 mm wide by 695 mm deep.
If you buy through a link on this page, the retailer may pay us a commission.
Prices checked 28 Oct 2026. Retailers may change prices during the day.
Key specs
Type
Heat pump
Capacity
10 kg
Width
602 mm
Depth
695 mm
Height
850 mm
Weight
62 kg
Labelled cycle
6 h 08 m
Reverse tumble
Yes
Drain hose included
Yes
Door hinge
Right
Energy stars
10
Energy a year
122 kWh
Cost a year, one load a week
$39
Manufacturer's warranty
2 Years
Made in
China
Registration no.
ACD0960
Size, weight, noise, series, door and warranty figures, where the registry is silent, come from retailer listings, checked 28 Oct 2026.
Dimensions are cabinet figures. Manufacturers offer wall-mount brackets for some vented models; heat-pump and condenser dryers sit on the floor.
Will it fit
The cabinet measures 602 mm wide, 695 mm deep and 850 mm high, from the register and retailer spec sheets. Enter the space it has to go in.
Not included. These are cabinet figures. Manufacturers state a ventilation clearance per model in the installation instructions; a figure typed into the Clearance box applies to both sides, the back and the top. No clearance figure for this model is held here, so the answer above allows none until one is entered.
Manuals and guides
Fisher & Paykel's manuals are on its support site.
Figures trace to this machine's entry (ACD0960) in the Australian Government's energy-rating database, and to retailer checks on the dates shown. The label's annual energy figure assumes one load a week, so a household drying four loads a week uses four times it; the heat pump payback page works through that arithmetic.
